Home and Kitchen Appliance RepairsChimney Installation Tips: How to Install Kitchen Chimney?

May 26, 2021by Rakesh0
https://www.urbanrepairing.com/wp-content/uploads/2021/05/Kitchen-Chimney-Tips-1280x438.jpg

Chimneys are the essential kitchen appliances that keep your kitchen smoke-free and convenient. It absorbs all the heat, smoke, food odors, etc., and throws it out automatically. For this purpose, the chimney uses an internal fan and a filter. 

There are several brands in India selling different types of chimneys, like ductless chimneys and ducted chimneys. The difference is that the ducted chimneys extract the air from the kitchen and release it through the duct. Whereas, the ductless chimneys suck up the smoke and heat and recycle them using a charcoal filter. The recycled air is then circulated back into the kitchen. 

So, if you have recently bought a new chimney or want to reinstall an existing chimney, the installation process can be quite tedious. Regardless of the chimney model, it is pretty complicated and challenging to install a kitchen chimney by yourself. If you want to do it without indulging in a difficult task, finding reliable chimney installation and maintenance services would be better. 

But if you have decided to do it on your own, then we have this post for you on how to install a kitchen chimney. 

 

Tools required for chimney installation

For installing the chimney, you will need to following tools at your side:

  • Screwdriver
  • Plier
  • Measuring tape
  • Hammer
  • Drilling machine
  • Marker pen

Along with these, you will need to use the additional tools that come with your kitchen chimney. 

Mounting and Placement

The chimney must be installed right over your gas stove so that it can extract the smoke and other things out efficiently. Keep some distance between the gas stove and the chimney, where you can use your cooking range and prepare food without any hassle. You must keep at least a one-meter distance between the chimney bottom and gas stovetop. 

Fastening chimney on the wall 

The most important step in the process is to fasten the chimney to the wall. While doing this, keep the measurement tape and marker pen handy. Take help from someone to hold the chimney in place while you use the marker pen to point the placements for holes on the wall.

After marking the holes, you have to use the drilling machine to drill the holes on marked points. In the holes, fit the plugs that come with your chimney. Now, place the chimney hood on the wall and use the screwdriver to drive the screws. Use all the screws that come with the chimney so that the appliance doesn’t remain shaky or loose. 

Chimney Duct

For the maximum efficiency and the best performance of the chimney, the duct length should be short. Shorter ducts keep the suction power of your chimney efficiently. Ensure that the duct length is not more than 10 feet. If you need to use a longer duct, then try to use the proper position for the chimney in the kitchen, where it becomes easier for you to optimize the duct length. 

Additionally, experts suggest that you should not use more than two bends in your chimney duct. The reason behind it is that the longer ducts with more bends are less effective than the shorter ducts with fewer bends. 

Find wires

The wires of the chimney usually come covered in the panel at the bottom of the chimney. Just remove the cover and find the wires. If you are not sure about wiring, it is always good to open the manual that comes with the appliance and open the page where things about wiring have been mentioned. 

Electricity connection

A chimney is an electric appliance that needs the power to operate. If you already have a power plug at an appropriate location on the wall, then it is great. If the plug is far from the chimney, you can arrange a new wire to form a connection between the chimney and the plug. If possible, try to get a new power plug installed near the chimney. 

Start the chimney

When using a chimney for the first time, it is highly recommended to run it without doing any cooking. Let it breathe freely for five to ten minutes for a good start. Once it comes into action, you are good to go. 

Furthermore, the chimney comes with options to adjust the speed of exhausting based on your needs. For instance, if you cook something that creates more smoke than usual cooking, then you can increase the speed of the chimney. Utilize this feature for your benefit. 

 

Wrapping Up:

If you are handy with maintaining home and kitchen appliances on your own, then you can put in some effort to install a kitchen chimney without any expert. But if you don’t usually do such things at home, then this is going to be a challenging task for you. You will be better with Kitchen Chimney Installation and find a technician at your doorstep. 

Leave a Reply

Your email address will not be published. Required fields are marked *

Call Now
Quick Inquiry





    Powered by
    Quick Contact